Current Linde Automated-Trucks L-MATIC

2022 Linde L-MATIC Base

2022 Linde L-MATIC Base

Swipe to View More

  • Year 2022
  • Make Linde
  • Model L-MATIC
Shop Linde Pre-Owned
Product Details Specifications Photos
2022 Linde L-MATIC Base

2022 Linde L-MATIC Base

  • Year 2022
  • Manufacturer Linde
  • Model Name L-MATIC
  • Trim Name Base
  • Generic Type (Primary) General

2022 Linde L-MATIC

Effective Load Handling for Low Lift Heights

The Linde Material Handling L-MATIC pallet stacker is suitable for storage or removals at low level. It tackles loads of up to 1,200 kg and lift heights up to 1.9 meters. Thanks to infrastructure free geo-navigation, the L-MATIC can be used flexibly as an individual truck or as part of an automated fleet. When operating in this manner, the robotic forklift is able to integrate safely and efficiently with people, non-automated trucks or the customer’s infrastructure, such as belt conveyors or packing stations. Furthermore, manual operation is possible at any time, used to, for example, move the equipment away from a dangerous zone quickly in the event of an emergency, or to use the truck to carry out another short-term task.

Features may include:
  • Navigation module on a robust frame with lighting signals, control panel, touch screen, communication module, navigation laser, front & rear safety scanner, traction/steering & lifting software management
  • Drive wheel and tandem load wheels polyurethane
  • Lateral change 3PzS
  • Standard mast 1924 mm
  • Fork carriage 560/1150/55 mm built out
  • Pre-setting for wet battery
  • Key switch truck acess
  • Polycarbonate mast protection
  • Load detection sensor
  • 3D camera for volume perception (technical conditions apply)

Operational

Operating Speed Travel, with/without load: 6 / 6 km/h | Lifting, with/without load: 0.11 / 0.22 m/s | Lowering, with/without load: 0.3 / 0.3 m/s
Drive Control LAC

Wheels & Tires

Tires, Front Specification Ø 254 x 102
Tires, Rear Specification 2x Ø 85 x 85
Wheels Number front/rear: 1x + 2 / 2

Dimensions

Dimensions Load centre: 600 c (mm) | Axle centre to fork face: 948 mm | Fork: 55 mm x 180 mm x 1150 mm
Wheelbase 1625 y (mm)
Track Width Front: 544 mm | Rear: 380 mm
Height Of mast, lowered: 1490 mm | Of mast, extended: 2460 mm | Of tiller arm in operating position, min/max: 1140 / 1350 mm | Lowered: 86 mm
Overall Length 2285 mm
Length To fork face: 1135 mm
Overall Width 804 mm
Ground Clearance Centre Of Wheelbase: 20 mm
Width Of fork carriage: 780 mm | Aisle with pallet 1000 x 1200 across forks: 2868 mm | Aisle with pallet 800 x 1200 along forks: 2739 mm
Turning Radius 2066 mm

Capacities

Cargo Capacity 1.2 / 2.0 t
Axle Capacity, Front With Load: 1367 mm | Without Load: 1110 kg
Axle Capacity, Rear With Load: 1248 mm | Without Load: 305 kg

Weights

Weight Service: 1415 kg | Battery: 295 kg

Product Photography

Warning WARNING: Operating, servicing and maintaining a passenger vehicle, an off-highway motor vehicle or a recreational marine vessel can expose you to chemicals including engine exhaust, carbon monoxide, phthalates, and lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. To minimize exposure, avoid breathing exhaust, do not idle the engine except as necessary, service your vehicle or vessel in a well-ventilated area and wear gloves or wash your hands frequently when servicing your vehicle or vessel. For more information go to https://www.p65warnings.ca.gov/products/passenger-vehicle and https://www.p65warnings.ca.gov/products/marine.